Going to do some changes to the front







The wurst thing happened to me .... lost the flat cable connecting the PCB push button and the controller.
In the beginning I was thinking that I must put the flatcable somewhere save before I lose it.
So I've lost it . Fortunately there was Ruud from Coolermaster, who still has parts of the Cosmos
Cooler Master Europe Store for all your spare parts
Ruud... thanks man!





And everything is online again







Inverse color display is a nice thing



slide panel closed again, nothing to see anymore



Cable management is still a big mess, but this is how I placed the controller







This will become more organised ​​;)
Drilled a hole for the switches and HDD LED



And I have cut a 3mm black piece of acrylic to make a cover for the side bay, I don't like holes and slots So this will disappear.



Made a second layer and cut out the form of the CM push buttons.



Placed the first layer back



Second layer on top



Past some black film on the second layer



And the result



Nice, tight and the good color.
I also been busy with the XL window for the Cosmos. What appeared to be quite a challenge because lots of plastic and little space

The acrylic window I've made ​​1cm larger as the existing hole.











Need to put more pressure on the edges , but this is how it becomes

For pasting the metal cover back on the plastic, I used contact adhesive. This is because I don't have to much space for double sided tape, and it just needs to be good. Placed everywhere clamps and other stuff, which will stay on for a night. And need to make the inside a bit nicer. Ofcourse after installing the window wanted to see how it looks.







And also have been playing with the enlightened midplate for some nightshots. I'm also thinking to put some lights in the midsection or top.











That's it for now...Grtz.

Nice!

My favourite update so far!

+1

Looking sweeeeeeeeeeeeeeeet!

fu*k I want your side window mod

amazing update, excited to see what you have planned for the front then, and thanks for hearing my suggestion

Thanks my modding friends









This will become 1 of the last Cosmos updates my friendly followers. Just one more to go, the pro photoshoot.
The Cosmos is as good as finished now. It was a very nice build, partly because the Cosmos was allready in my possession before he was in the shop, and that the kick-off exactly started with the big Cosmos II release.

For this a deep bow for Cooler Master, EKWB, ZOTAC and IT service.be. Thank you again for the confidence and support.

The last small things in this last update.

The white front I covered with black film, which looks better then the white acrylic. But with some white lines still visible.





All side panels opened and the big, big Cosmos exhibited



A great modular power supply, the Cooler Master Hybrid 1050W











Enough connections



And enough space left, which comes in handy for the excess length of the cables





Some cable management



Side cover is placed with the HDDs







Because it was too dark inside, I have placed a single CCFL in a custom bracket that I have bolted to the 360 ​​rad using the existing holes. Now was to bright, so I made it ​​softer with a small piece of white paper.



Finalized the sleeved cables, a little tightening etc.







Total shot of the PCI-e SATA 24pins and sats



And the internal end result







And my favorite picture



Next update....Final photoshoot

Perfection...

Incredible

Tomorrow the Cosmos is going to the studio, so transported it with some trouble downstairs. Couldnt let the opportunity pass to shoot a pic of the Cosmos and my little watchrabbit

, what a cute little guy, and the build compliments the guy too .